Coalescing Filters

Product Description

We offer Coalescing Filter for air and gas with range of removal dirt, dust, rust, condensate, moisturecontent, exhaust fumes and oil impurities. We design Coalescing Filter with various parameters of compressed air like flow rate, line size, operating pressure, Operating Temperature, and Filtration Rating. We offer CoalescingFilter with Aluminium, CS and SS housings. Coalescing Filter elements made of various filter medias like paper, synthetic, polyester, pp, coalescing, borosilicate glass fibre, activated carbon, HDPE, non-woven, stainless steelwire mesh, sintered bronze, sintered wire mesh and sintered powder. We also offer scrubber system for moisture separation from air and gas.

Air/Gas Filter classified under below categories.

a)     MS Moisture Separator

For the removal of 99% of bulk oil/water removal from the compressed air.

b)    SB Pre Filtration

Sintered bronze filter elements for removal of pipe scales, bulk liquid, solid p[articles, dust down 5 micron. This filter elements available in 5, 10, 25 and above microns.

c)     PF High Efficiency Fine Filter

For the removal of particles down to 1 micron including coalesced liquid water and oil, dust, providing a maximum remaining oil aerosol content of 0.5 mg/m at 21 C.

d)    UF High Efficiency Oil Removal Filtration

For the removal of particles down to 0.01micron including oil aerosols, dust, providing a maximum remaining oil aerosol content of 0.01 mg/m (0.01 ppm) at 21 C efficiency 99.99% (install in series with filter type PF). [Borosilicate glass microfibers filter media which actively repel oil to reduce pressure drop and running cost to an absolute minimum.]

e)    AC Activated Carbon Filtration

For the removal of vapour and hydro carbonod ours giving a maximum remaining oil content of  <0.003 mg/m (<0.003 ppm) (excluding methane) at 21 C (install in series with filter type PF + UF).

Technical Parameters:

• Line Size: NB to 30 NB
• End Connections: 150# & 300# Flanged, Table E &Table F Flanges, DIN Standard Flanges Butt Weld,
• NPT/BSPThreaded, Hose Pipe Conn., Tri Clover Adaptor, SMS Union/Dairy Conn.
• Material of Construction : Aluminium, CS, MS, SS304, SS304L,SS316, SS316L, SS317L
• Operating Pressure: 0 to 50 Bar
• Operating Temperature: 15 Deg. C to 500 Deg. C
• Flow Rate : Up to 80,000 NM3/Hr. & More
• Filtration Rating : 0.01 Micron to 6000 Micron & More
• Top cover with nut & bolts type or quick opening type

Advantages:

Easy to clean

•     Low Pressure drop
•      Large area
•     Easy to operate and maintenance
•     Positive Sealing to prevent bypass
•       Customized design
•      High dirt load holding capacity