Gas Coalescing Filter Element

Product Description

Air/Gas Filter classified under below categories.

a)     MS – Moisture Separator

For the removal of 99% of bulk oil/water removalfrom the compressed air.

b)    SB – Pre Filtration

Sintered bronze filter elements for removalof pipe scales, bulk liquid, solid p[articles, dust down 5 micron. This filterelements available in 5, 10, 25 and above microns.

c)     PF – High Efficiency Fine Filter

For the removal of particles down to 1 micronincluding coalesced liquid water and oil, dust, providing a maximum remainingoil aerosol content of 0.5 mg/m³ at 21 °C.

d)    UF – High Efficiency Oil Removal Filtration

For the removal of particles down to 0.01micron including oil aerosols, dust, providing a maximum remaining oil aerosolcontent of 0.01 mg/m³ (0.01 ppm) at 21 °C efficiency – 99.99% (install inseries with filter type PF). [Borosilicate glass microfibers – filter mediawhich actively repel oil to reduce pressure drop and running cost to anabsolute minimum.]

e)    AC – Activated Carbon Filtration

For the removal of vapour and hydro carbonodours giving a maximum remaining oil content of  <0.003 mg/m³ (<0.003 ppm) (excludingmethane) at 21 °C (install in series with filter type PF + UF).

Advantages:

a)     Easy to clean

b)    Low Pressure drop

c)     Large area

d)    Easy to operate and maintenance

e)    Positive Sealing to prevent bypass

f)      Customized design

g)     High dirt load holding capacity

Applications:

a)     Refineries and Petrochemicals

b)    Power Plants

c)     Oil & Gas

d)    Water filtration and Cooling Towers

e)    Chemical Industries

f)      Automobile Industries

g)     Steel Industries, Metals & Minerals

h)    Textile Industries

i)      Dairy and Food Industries

j)      Dyes, Inks and paints Industries

k)     Cement Industries

l)      Fertilizers Industries

m)   Pharmaceuticals

n)    Coolant Oils and Cutting Fluids