Oil Coalescing Filters

Product Description

Coalescing Filter elements made of various filter medias like paper, synthetic, polyester, pp, coalescing, borosilicate glass fibre, activated carbon, HDPE, non-woven, stainless steel wire mesh, sintered bronze, sintered wire mesh and sintered powder. We also offer scrubber system for moisture separation from air and gas.

Air/Gas Filter classified under below categories.

a)     MS Moisture Separator

For the removal of 99% of bulk oil/water removal from the compressed air.

b)    SB Pre Filtration

Sintered bronze filter elements for removal of pipe scales, bulk liquid, solid p[articles, dust down 5 micron. This filter elements available in 5, 10, 25 and above microns.

c)     PF High Efficiency Fine Filter

For the removal of particles down to 1 micron including coalesced liquid water and oil, dust, providing a maximum remaining oil aerosol content of 0.5 mg/m at 21 C.

d)    UF High Efficiency Oil Removal Filtration

For the removal of particles down to 0.01micron including oil aerosols, dust, providing a maximum remaining oil aerosol content of 0.01 mg/m (0.01 ppm) at 21 C efficiency 99.99% (install in series with filter type PF). [Borosilicate glass microfibers filter media which actively repel oil to reduce pressure drop and running cost to an absolute minimum.]

e)    AC Activated Carbon Filtration

For the removal of vapour and hydro carbonod ours giving a maximum remaining oil content of  <0.003 mg/m (<0.003 ppm) (excluding methane) at 21 C (install in series with filter type PF + UF).

Applications:

•    Refineries and Petrochemicals
•    Power Plants
•     Oil & Gas
•     Water filtration and Cooling Towers
•    Chemical Industries
•    Automobile Industries
•    Steel Industries, Metals & Minerals
•     Textile Industries
•      Dairy and Food Industries
•     Dyes, Inks and paints Industries
•   Cement Industries
•  Fertilizers Industries
•  Pharmaceuticals
•  Coolant Oils and Cutting Fluids