Gas Filter system

Product Description

We offer gas filters with range of removal dirt, dust, rust, condensate, moisture content, exhaust fumes and oil impurities. We design gas filter with various parameters of compressed air like flow rate, line size, operating pressure, Operating Temperature, and Filtration Rating. We offer gas filter with Aluminium, CS and SS housings. Gas filter elements made of various filter medias like paper, synthetic, poly ester,pp, coalescing, borosilicate glass fibre, activated carbon, non-woven, stainless steel wire mesh, sintered bronze, sintered wire mesh and sintered powder. We also offer scrubber system for moisture separation from gas.

Gas filters classified under below categories.

a)     MS Moisture Separator

For the removal of 99% of bulk oil/water removal from the compressed gas.

b)    SB Pre Filtration

Sintered bronze filter elements for removal of pipe scales, bulk liquid, solid p[articles, dust down 5 micron. This filter elements available in 5, 10, 25 and above microns.

c)     PF High Efficiency Fine Filter

For the removal of particles down to 1 micron cluding coalesced liquid water and oil, dust, providing a maximum remaining oil aerosol content of 0.5 mg/m at 21 C.

d)    UF High Efficiency Oil Removal Filtration

For the removal of particles down to 0.01micron including oil aerosols, dust, providing a maximum remaining oil aerosol content of 0.01 mg/m (0.01 ppm) at 21 C efficiency 99.99% (install in series with filter type PF). [Borosilicate glass microfibers filter media which actively repel oil to reduce pressure drop and running cost to an absolute minimum.]

e)    AC Activated Carbon Filtration

For the removal of vapour and hydro carbonod ours giving a maximum remaining oil content of  <0.003 mg/m (<0.003 ppm) (excluding methane) at 21 C (install in series with filter type PF + UF).

Technical Parameters:

• Line Size: NB to 30 NB
• End Connections: 150# & 300# Flanged, Table E &Table F Flanges, DIN Standard Flanges Butt Weld,
•  NPT/BSPThreaded, Hose Pipe Conn., Tri Clover Adaptor, SMS Union/Dairy Conn.
• Material of Construction : Aluminium, CS, MS, SS304, SS304L,SS316, SS316L, SS317L
• Operating Pressure: 0 to 50 Bar
• Operating Temperature: 15 Deg. C to 500 Deg. C
• Flow Rate : Up to 80,000 NM3/Hr. & More
• Filtration Rating : 0.01 Micron to 6000 Micron & More
• Top cover with nut & bolts type or quick opening type

Advantages:

• Easy to clean
• Low Pressure drop
•   Large area
• Easy to operate and maintenance
• Positive Sealing to prevent bypass
•  High dirt load holding capacity    

Applications:

•  Refineries and Petrochemicals
•   Power Plants
•    Oil & Gas
•   Chemical Industries
•   Automobile Industries
•  Steel Industries, Metals & Minerals
• Textile Industries
• Dairy and Food Industries
•  Dyes, Inks and paints Industries
•  Cement Industries
•  Fertilizers Industries
•  Pharmaceuticals 

a)