Cylindrical Air Filter Housing

Product Description

We offer compressed air filterswith range of removal dirt, dust, rust, condensate, moisture content, exhaustfumes and oil impurities. We design compressed air filter with variousparameters of compressed air like flow rate, line size, operating pressure,Operating Temperature, and Filtration Rating. We offer compressed air filter withAluminium, CS and SS housings. Compressed air filter elements made of variousfilter medias like paper, synthetic, polyester, pp, coalescing, borosilicateglass fibre, activated carbon, HDPE, non-woven, stainless steel wire mesh,sintered bronze, sintered wire mesh and sintered powder. We also offer scrubbersystem for moisture separation from compressed air.

Compressed air filters classified under below categories.

MS Moisture Separator

For the removal of 99% of bulk oil/waterremoval from the compressed air.

SB Pre Filtration

Sintered bronze filter elements for removalof pipe scales, bulk liquid, solid p[articles, dust down 5 micron. This filterelements available in 5, 10, 25 and above microns.

PF High Efficiency Fine Filter

For the removal of particles down to 1 micronincluding coalesced liquid water and oil, dust, providing a maximum remainingoil aerosol content of 0.5 mg/m at 21 C.

UF High Efficiency Oil Removal Filtration

For the removal of particles down to 0.01micron including oil aerosols, dust, providing a maximum remaining oil aerosolcontent of 0.01 mg/m (0.01 ppm) at 21 C efficiency 99.99% (install inseries with filter type PF). [Borosilicate glass microfibers filter mediawhich actively repel oil to reduce pressure drop and running cost to anabsolute minimum.]

AC Activated Carbon Filtration

For the removal of vapour and hydro carbonodours giving a maximum remaining oil content of <0.003 mg/m (<0.003 ppm) (excludingmethane) at 21 C (install in series with filter type PF + UF).

Technical Parameters:

Line Size: NB to 30 NB

End Connections: 150# & 300# Flanged, Table E &Table F Flanges, DIN Standard Flanges Butt Weld,

NPT/BSPThreaded, Hose Pipe Conn., Tri Clover Adaptor, SMS Union/Dairy Conn.

Material of Construction : Aluminium, CS, MS, SS304, SS304L,SS316, SS316L, SS317L

Operating Pressure: 0 to 50 Bar

Operating Temperature: 15 Deg. C to 500 Deg. C

Flow Rate : Up to 80,000 NM3/Hr. & More

Filtration Rating : 0.01 Micron to 6000 Micron & More

Top cover with nut & bolts type or quick opening type

Advantages:

• Easy to clean
• Low Pressure drop
• Large area
• Easy to operate and maintenance
• Positive Sealing to prevent bypass
• Customized design
• High dirt load holding capacity

Applications:

• Refineries and Petrochemicals
• Power Plants
• Oil & Gas
• Water filtration and Cooling Towers
• Chemical Industries
• Automobile Industries
• Steel Industries, Metals & Minerals
• Textile Industries
• Dairy and Food Industries
• Dyes, Inks and paints Industries
• Cement Industries
• Fertilizers Industries
• Pharmaceuticals
• Coolant Oils and Cutting Fluids